Electromechanical Division
Parker Hannifin Corporation
p/n 88-027033-01A
Effective: June 2006
Quick Reference Guide
AR-01xR, 02xR, 04xR, 08xR, and 13xR
ries
ARIES
Arie
s A
R-0
8AE
High-performance motion control equipment is capable of producing rapid movement and very
high forces. Unexpected motion may occur especially during the development of controller
programs. KEEP WELL CLEAR of any machinery driven by stepper or servo motors. Never
touch any part of the equipment while it is in operation.
This product is sold as a motion control component to be installed in a complete system using
good engineering practice. Care must be taken to ensure that the product is installed and used
in a safe manner according to local safety laws and regulations. In particular, the product must
be positioned such that no part is accessible while power may be applied.
This and other information from Parker Hannifin Corporation, its subsidiaries, and authorized
distributors provides product or system options for further investigation by users having
technical expertise. Before you select or use any product or system, it is important that you
analyze all aspects of your application and review the information concerning the product in
the current product catalog. The user, through its own analysis and testing, is solely respon-
sible for making the final selection of the system and components and assuring that all
performance, safety, and warning requirements of the application are met.
If the equipment is used in any manner that does not conform to the instructions given in this
user guide, then the protection provided by the equipment may be impaired.
Safety Warning!
!
!
Product Type . . . . . . . . . . . . . . . . . . . . . . . . Aries AR-01xR, 02xR, 04xR, 08xR, and AR-13xR
The above product complies with the requirements of directives
•
EMC Directive 89/336/EEC
•
Low Voltage Directive 73/23/EEC
•
CE Marking Directive 93/68/EEC
Provided the installation requirements described in the
Aries User Guide
are met, and there
are no special requirements of the installation and operating environment so that the
application may be considered typical.
The above equipment conforms with the protection requirements of Council Directive
89/336/EEC as amended by Directive 92/31/EEC on the approximation of the laws of the
Member States relating to Electromagnetic Compatibility when installed, operated and
maintained as intended. Also: -The above equipment conforms with the requirements of
Council Directive 73/23/EEC (Low Voltage Directive) as amended by Directive 93/68/EEC (CE
Marking Directive), when installed, operated, and maintained as intended.
In accordance with IEC 61800-3:1997 (Adjustable speed electrical power drive systems) this
product is of the restricted sales distribution class which meets the needs of an industrial
environment when installed as directed. However, further measures may need to be taken for
use of the product in a domestic environment.
The installation requirements are detailed in the Information supplied with the equipment. The
equipment is sold only to competent system builders.
