GB - 11
Direction Control Lever
For side air flow:
1. Lift the direction control lever (item 3) up,
move to the forward position and
release.
2. Ensure that the assembly locks securely
into the front notch on the bottom of the
outlet.
3. Adjust the horizontal air deflector for the
desired air flow angle and tighten.
For forward air flow:
1. Lift the direction control lever (item 3) up,
move to the rear position and release.
2. Ensure that the assembly locks securely
into the rear notch on the bottom of the
outlet.
3. Move the horizon al air deflector to the
down position to allow unit to operate
closely to walls, fences, etc.
WARNING:
AVOID INJURY! Stop the
engine and wait for the impeller
blades to stop rotating before making
any adjustments to the air flow.
Impeller blades will continue to rotate
for a short time after the engine has
been shut off.
Figure 6
Air Flow to the Front
Air Flow to the Side
1. Horizontal Air Deflector Up
2. Horizontal Air Deflector Down
3. Direction Control Lever
4. Vertical Air Deflector Rear Position
5. Vertical Air Deflector Forward Position
Summary of Contents for 947103-169cc
Page 21: ......