
28
MODBUS
RS485/RS232 Communications Interface
OP PORT PROTOCOL
F
SET\SERL SE06
Range: Enumerated - see below
Selects the protocol to be used by the keypad port on the front of the drive. When EIBISYNC
ASCII is selected, BAUD RATE is 19200 and PARITY is EVEN.
Enumerated Value
:
Protocol
0 : AUTOMATIC - checks for keypad or EI ASCII
1 : KEYPAD
2 : EIBISYNC ASCII
3 : MODBUS
4 : FIELDBUS
P3 PORT PROTOCOL
F
SET\SERL SE07
Range: Enumerated - see below
Selects the protocol to be used by the RS232 programming port on the drive's control board.
When EIBISYNC ASCII is selected, BAUD RATE is 19200 and PARITY is EVEN.
Enumerated Value
:
Protocol
0 : AUTOMATIC - checks for keypad or EI ASCII
1 : KEYPAD
2 : EIBISYNC ASCII
3 : MODBUS
4 : FIELDBUS
RS485 PORT PROTOCOL
F
SET\SERL SE08
Range: Enumerated - see below
This parameter is not available on the 650V Frame 1, 2 & 3.
Selects the protocol to be used by the RS485 programming port on the drive's control board.
Enumerated Value
:
Protocol
0 : AUTOMATIC
1 : KEYPAD (not applicable)
2 : EIBISYNC ASCII
3 : MODBUS
4 : FIELDBUS
SWITCH OP PORT
F
SET\SERL SE09
Range: FALSE / TRUE
This parameter is not available on the 650V Frame 1, 2 & 3.
When TRUE, the keypad port on the front of the drive is disabled when the communications
equipment is connected to the RS232 programming port on the drive's control board.
When FALSE, the RS485 programming port is disabled when the communications equipment is
connected to the RS232 programming port. Both ports are on the drive's control board.
SWAP WORD ORDER
Range: FALSE / TRUE
Controls the word order used with 32-bit data access with the Modbus RTU protocol. When this
parameter is FALSE the lower, even address of a pair of registers will contain the least
significant 16 bits of the parameter data. The higher, odd address will contain the most
significant 16 bits of parameter data.
When this parameter is true, the most significant 16 bits of parameter data are held in the lower,
even register, while the least significant 16 bits of parameter data are held in the higher, odd
register.
Summary of Contents for 6513
Page 7: ......