9 - Programming interface
Strada Transfert Evolution2 - Operation manual
42/50
9.3
Basic programming functions
Press
F
on the keyboard to access the Maintenance menu or enter the open-
door option code.
Select the programming function number from the list below, for example '
1
'
(time setting).
Validate with
V
.
At the end of an on-site programming function, after you validate with
V
(or cancel
with
C
), the terminal will ask:
CONFIRM?
YES: 1 NO: 2
or
CANCEL?
YES: 1 NO: 2
IMPORTANT:
Do not try to use other maintenance function numbers without the
consent of the technical department.
Function 1 - Setting the date and time
Enter the current date, say 9.57 a.m. on Friday September 22 2000.
The day of the month will flash . enter
22
followed by
.
The month will flash ............... enter
09
followed by
.
The year will flash ................. enter
00
followed by
.
The year will flash ................. enter
09
followed by
.
The minutes will flash ............. enter
57
followed by
V
.
IMPORTANT:
The terminal will automatically display the
day
of the week (Friday in this
case).
