Bucketless Handle
LBH18 Instruction Sheet
First Time Assembly Instructions:
1. Remove contents of carton
2. Assure all components listed above are present
3. Place threaded collar on handle
4. Insert handle stem into yoke and align holes
5. Insert locking ring
6. Tighten threaded collar
How To Load Unit With Cleaning
Fluid:
1. Remove dispensing bottle from holster
2. Remove orange fill cap
3. Fill bottle to 32 oz fill line (or desired amount if less than 32 oz)
4. Assure cleaning solution is diluted properly
5. Replace orange fill cap
6. Replace dispensing bottle firmly yet gently to holster. NOTE: Bottle is not fully
engaged and properly seated until you hear and feel a “click”.
Included:
1. Handle Assembly
2. Dispensing Bottle
3. Instruction Sheet
4. Frame (Velcro
®
)
5. Chemical Identification
Labels Sheet
How To Attach Mop Frame:
If using Velcro
®
frame:
1. Carefully place correct size and type of head
against the Velcro
®
strips on the bottom of frame.
This is best achieved by laying the mop head
face down on the floor then placing the frame
evenly upon the mop head.
If using a collapsing frame with pocket mops:
1. Place mop frame face down on floor.
2. Using your foot, depress the frame release
button on the collapsing frame
3. With frame in collapsed position, place each
“end” or “wing” of the frame at each opening of
the mop head pockets.
4. Apply gentle, but firm downward pressure to
the handle until the frame extends into both
mop pockets. NOTE: A “click” will signify that
the frame is locked into operating position,
assuming both ends are properly inserted to
mop pockets.
Frame Style
Dusting
Damp Mopping
Deeper Cleaning
Disposable Heads
Floor Finish
Application
Staining Application
Concrete Floor
Hook & Loop
18”
3177-Mop wet looped
microfiber white
LFFD18 – Mop dust
fringe microfiber Velcro
®
gray blue
LF0011 – Mop wet
looped microfiber pad
blue
LF0012 – Mop wet
looped microfiber pad
blue
3177 – Mop wet looped
microfiber white
LWBS18 – Mop wet
microfiber scrubber blue
LWGS18 – Mop wet
microfiber scrubber
green
LWRS18 – Mop wet
microfiber scrubber red
LWYS18 – Mop wet
microfiber scrubber
yellow
DISP18 – Pad
microfiber disposable
white
(needs to be modified
and does not stick to
molded Velcro
®)
LFFV18 – Mop finish
microfiber trapezoid
white
3189 – Mop microfiber
18” finish white blue
stripes blue band
LFFV18 – Mop finish
microfiber trapezoid
white
3189 – Mop microfiber
18” finish white blue
stripes blue band
Collapsing Frame
16”
LFPB16 – Mop wet
scrubber microfiber
pocket style fringe blue
LLPY16 – Mop wet
looped microfiber style
pocket style yellow
LFPB16 – Mop wet
scrubber microfiber
pocket style fringe blue
LLPY16 – Mop wet
looped microfiber style
pocket style yellow
LFPB16 – Mop wet
scrubber microfiber
pocket style fringe blue
N/A - pocket backing
rules out inexpensive
pads
N/A
N/A
How To Choose The Correct Mop Head
200 ml
400 ml
600 ml
800 ml
1000 ml
1
2
3
4
5
Bucketless Handle
LBH18 Instruction Sheet
First Time Assembly Instructions:
1. Remove contents of carton
2. Assure all components listed above are present
3. Place threaded collar on handle
4. Insert handle stem into yoke and align holes
5. Insert locking ring
6. Tighten threaded collar
How To Load Unit With Cleaning
Fluid:
1. Remove dispensing bottle from holster
2. Remove orange fill cap
3. Fill bottle to 32 oz fill line (or desired amount if less than 32 oz)
4. Assure cleaning solution is diluted properly
5. Replace orange fill cap
6. Replace dispensing bottle firmly yet gently to holster. NOTE: Bottle is not fully
engaged and properly seated until you hear and feel a “click”.
Included:
1. Handle Assembly
2. Dispensing Bottle
3. Instruction Sheet
4. Frame (Velcro
®
)
5. Chemical Identification
Labels Sheet
How To Attach Mop Frame:
If using Velcro® frame:
1. Carefully place correct size and type of head
against the Velcro® strips on the bottom of frame.
This is best achieved by laying the mop head
face down on the floor then placing the frame
evenly upon the mop head.
If using a collapsing frame with pocket mops:
1. Place mop frame face down on floor.
2. Using your foot, depress the frame release
button on the collapsing frame
3. With frame in collapsed position, place each
“end” or “wing” of the frame at each opening of
the mop head pockets.
4. Apply gentle, but firm downward pressure to
the handle until the frame extends into both
mop pockets. NOTE: A “click” will signify that
the frame is locked into operating position,
assuming both ends are properly inserted to
mop pockets.
Frame Style
Dusting
Damp Mopping
Deeper Cleaning
Disposable Heads
Floor Finish
Application
Staining Application
Concrete Floor
Hook & Loop
18”
3177-Mop wet looped
microfiber white
LFFD18 – Mop dust
fringe microfiber Velcro®
gray blue
LF0011 – Mop wet
looped microfiber pad
blue
LF0012 – Mop wet
looped microfiber pad
blue
3177 – Mop wet looped
microfiber white
LWBS18 – Mop wet
microfiber scrubber blue
LWGS18 – Mop wet
microfiber scrubber
green
LWRS18 – Mop wet
microfiber scrubber red
LWYS18 – Mop wet
microfiber scrubber
yellow
DISP18 – Pad
microfiber disposable
white
(needs to be modified
and does not stick to
molded Velcro®)
LFFV18 – Mop finish
microfiber trapezoid
white
3189 – Mop microfiber
18” finish white blue
stripes blue band
LFFV18 – Mop finish
microfiber trapezoid
white
3189 – Mop microfiber
18” finish white blue
stripes blue band
Collapsing Frame
16”
LSPFB16 – Mop wet
scrubber microfiber
pock style fringe blue
LWPY16 – Mop wet
looped microfiber style
pocket style yellow
LSPFB16 – Mop wet
scrubber microfiber
pock style fringe blue
LWPY16 – Mop wet
looped microfiber style
pocket style yellow
LSPFB16 – Mop wet
scrubber microfiber
pock style fringe blue
N/A - pocket backing
rules out inexpensive
pads
N/A
N/A
How To Choose The Correct Mop Head
200 ml
400 ml
600 ml
800 ml
1000 ml
1
2
3
4
5