Parish Supply 8070 Mytee-Lite Instructions For Use Manual Download Page 8

Q: Are the pumps re-buildable for the 8070?

A: Yes, both the seals and the pistons have repair kits available.
Please see the pump manual that shipped with your machine for the
maintenance schedule.

Q: Is there anything I can do to increase the expected life of my machine?

A: Running the vacuum motors with the tank empty and lid off will allow excess
moisture in the vacs to dry off. You should also run a System Maintainer through
the system to keep the hoses, pump, and heater clean and free of debris.

 

 
Warranty

 

 
MYTEE LIFETIME LIMITED WARRANTY POLICY
Mytee Products, Inc. endeavors to provide high quality products and product support 
to its customers and therefore backs up all of its new products purchased from Mytee 
Products Inc. (“Mytee”) or any authorized Mytee distributor/service center with this 
lifetime limited warranty. This limited warranty begins on the date of the customer’s 
purchase and is valid and available to the original purchaser with proof of purchase, 
and is not transferable. Mytee’s products are for commercial use only and are not 
intended for personal, family or household uses.

HOUSING LIMITED LIFETIME WARRANTY: Mytee warrants for life that its rotation-
ally-molded housings will be free from manufacturing defects. This warranty covers 
the cost of replacement or repair only and does not cover shipping or labor costs.

WEAR PARTS 90-DAY LIMITED WARRANTY: Mytee will replace all wear parts for 
90 days from the date of original purchase. “Wear parts” are items which wear out 
as a result of usage or the passage of time and are consumed despite attempts to 
maintain them, such as gaskets, wheels, brass, cords, wires, electrical terminals, 
hoses, switches, thermostats, plastisol parts, filters, bearings, brushes, solenoids, o-
rings, bulbs, heating elements, castors, or other parts deemed wear items in Mytee’s 
sole discretion. This warranty covers the cost of replacement only and does not cover 
shipping or labor costs.

PUMP, VACUUM MOTOR AND HEATER TWO-YEAR LIMITED WARRANTY: Mytee 
warrants that pumps, vacuum and floor machine motors, and heaters will be free 
from manufacturing defects, defects in workmanship, and defects in material for two 
(2) years from the date of original purchase. This warranty does not apply and is void 
if the pump, vacuum motor, or heater has worn brush motors, water damage, chemi-
cal build-up, chemical damage, or evidence of abuse, neglect or tampering. This 
warranty covers the cost of replacement or repair only and does not cover shipping 
or labor costs.
 
HOWEVER, OTHER THAN SET FORTH HEREIN, MYTEE GIVES NO WARRANTY, 
EXPRESS OR IMPLIED, AS TO DESCRIPTION, QUALITY, MERCHANTABILITY, 
FITNESS FOR ANY PARTICULAR PURPOSE, PRODUCTIVENESS, INFRINGE-
MENT, OR OTHER MATTER, OF ANY GOODS WHICH MYTEE SHALL SUPPLY.  
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION 
ON THE FACE HEREOF. MYTEE SHALL IN NO WAY BE RESPONSIBLE FOR THE 
PROPER USE AND APPLICATION OF THE GOODS. MYTEE NEITHER ASSUMES 
NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR MYTEE ANY OTHER 
LIABILITY IN CONNECTION WITH THE SALE OF MYTEE’S GOODS. THIS LIM-
ITED WARRANTY POLICY MAY BE CHANGED OR WITHDRAWN BY MYTEE AT 
ANY TIME WITHOUT NOTICE.

LIMITATION OF DAMAGES: THE REMEDY OF REPLACEMENT OR REPAIR 
OF ANY DEFECTIVE GOODS SHALL BE THE EXCLUSIVE REMEDY UNDER 
ANY WARRANTY MADE BY MYTEE, WHETHER EXPRESS OR IMPLIED. IN NO 
EVENT SHALL MYTEE BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL 
DAMAGES, PROPERTY DAMAGES, OR PERSONAL INJURIES.

All limited warranties are void for, and Mytee does not warrant in any way, any prod-
uct that evidences misapplication, improper installation, abuse, lack of maintenance, 
negligence in use or care, abnormal use, alteration of design,

 

modification, use of 

incompatible or corrosive chemicals, use in a rental service, and/or servicing, installa-
tion of parts, or repairs by anyone other than Mytee or a Mytee authorized distributor 
or service center. Mytee may make changes in products it manufactures and markets 
at any time; these changes are made without obligation to change, retrofit, or up-
grade any product previously sold or manufactured.

Mytee has no obligation to honor the limited warranties set forth herein unless the 
original purchaser, promptly upon discovering the warranty claim and prior to continu-
ing to use the product, contacts Mytee or a Mytee authorized distributor or service 
center to describe the claim and to receive and follow instructions for documenting 
and resolving the claim. In addition, the purchaser must provide the product to which 
the claim applies to Mytee or a Mytee authorized distributor or service center for a 
thorough inspection. In addition, the purchaser must provide/return the product intact, 
unmodified, with all of its original parts.

If any provision or portion of this limited warranty policy is found to be unenforceable, 
then the remaining provisions and portions shall remain valid and enforceable. 
If any provision or portion of this limited warranty policy is found to be limited by law, 
then that provision or portion shall be construed to make it effective within the 
bounds of law. For example, if there are legal limitations on the duration of warran-
ties, the warranties made herein shall be construed to have the minimum duration 
required by law, or, if there are legal limitations of exclusion of remedies, the exclu-
sions made herein shall be construed to apply to the fullest extent possible without 
violating the law.

The validity, construction and performance of this warranty policy shall be governed 
by the laws of the State of California, without respect to conflicts of laws principles.  
The exclusive jurisdiction of any legal action arising from or related to this warranty 
policy shall be in the State of California and no legal action shall be commenced 
elsewhere.

Return Material Authorization Procedure 

 
It is the responsibility of any Authorized Service Center (ASC) or Distributor with 
written authorization to ensure the Customers equipment is repaired as soon as 
possible. Only Mytee Products Inc. or it’s authorized dealers with written authoriza-
tion, service centers, and agents may make warranty repairs on these products. All 
others do so at their own risk and expense. 
 
The Distributor must follow Mytee Products, Inc. standard RMA procedure: 
 
1. When a repair falls within the Warranty time period for a piece of equipment, the 
Distributor will fill out a RMA/Warranty claim form. This form will act as a repair order  
to replace any defective parts.  
 
2. All defective parts must be returned to Mytee Products, Inc. with the RMA/claim 
form for evaluation at the customer’s expense. This shipping is non-refundable. All 
warranty claims are subject to an evaluation by Mytee Products, Inc. to determine if 
warranty will be approved. Any credit for repair and/or parts will only be issued upon 
evaluation and approval from Mytee Products, Inc.  
 
3. When Warranty is approved, the Distributor’s account will be credited for the 
replacement part(s). Mytee Products, Inc. will ship the warranted replacement part(s) 
to the Distributor prepaid. If Warranty is denied the Distributor’s account will not be 
credited for any parts sent for this claim. 

Summary of Contents for 8070 Mytee-Lite













Reviews: