Parish Supply 8070 Mytee-Lite, Instructions For Use Manual, Page: 4 / 12

ATTACH VACUUM HOSE TO VACUUM INLET ATTACH HOSE
Firmly attach hose and quick disconnect. Make sure quick discon-
nects snap together firmly. Once attached to unit connect Q.D. to
upholstery tool. Always inspect hoses for cracks or fraying. Connect hose attachment for vacuuming.
HEATER
Release tool trigger. Turn on heater. Wait 8 – 10 minutes for unit
to pre-heat. Once heated, re-key upholstery tool until hot water
begins flowing. Once hot water is flowing, release trigger and pre-
heat an additional 4 – 5 minutes.
VACUUM PUMP
HEA
TER
PUMP
After the machine has been plugged into a 20 amp grounded
outlet, turn on pump. Key tool until upholstery tool releases a
steady flow.
VACUUM PUMP
HEA
TER