Paravan PR Heavy Duty Page 45 User Manual Download

Page: 45 / 74

Gener

Information

epar
e

Use

Help

Technology

Gener

Information

epar

Use

Help

Technology

Loading and transporting your electric wheelchair

To attach the Dahl Docking Station to the PR piccolino, use the screws

provided.

DANGER

Potential risk of injury or serious injury or death due to use of

incorrect screws.

›

Use the screws provided.

›

Do not use any other screws than those supplied from Dahl

Engineering (part no. 502800 which is quality 14.9 with torx

27 key). Standard screws will not be strong enough in the

event of a collision.

15.6.3 Description of the Dahl Docking system functions

①

Dahl Docking station

②

Lock plate and spacer

③

Lock pin

④

Red LED

⑤

Green LED

⑥

Control panel

⑦

Release button

⑧

Manual emergency release lever

⑨

Manual operating lever

)

Please refer to Dahl Engineerings installation and user guide

for height adjustable VarioDock™ system.

Fig. 48: System functions Dahl

Summary of Contents for PR Heavy Duty











































































Search results

Summary of Contents for PR Heavy Duty

Reviews:

Related manuals for PR Heavy Duty

Brands by name

Popular brands

Paravan PR Heavy Duty, User Manual

Search results

Summary of Contents for PR Heavy Duty

Reviews:

Related manuals for PR Heavy Duty

Brands by name

Popular brands