AccuCount II User Guide
3–16
120-0313
Rev 04
3.4 User menu
The User menu provides access to up to eight different password-protected user
profile settings, one of which must be the Administrator user.
NOTE
If no user profiles are enabled, then you can not select the User menu
(see “Define user submenu” on page 4-4).
Furthermore, you can not enable users until you have set the Administrator password
(see “Define administrator” on page 4-8).
To select a user profile
1
Press and hold the
Menu
key until the Home screen appears.
2
If necessary, press the
soft key to select the User menu.
NOTE
The currently active user is indicated by a dot next to the user profile icon.
3
Press the soft key below the user profile that you want to activate.
NOTE
If more than four user profiles are defined, you might have to press the
soft key to
switch to the second page of profiles, to find the desired user profile.
4
If necessary, enter the password for the user.
Once you log on to a user profile, the scale returns to the last application that user was using.
See “Administrator submenu” on page 4-2 for more information about defining user
profiles on the AccuCount II.
Summary of Contents for AccuCount II
