120-0313 Rev 04
1–7
Chapter 1 – Installation
8
Connect the included handheld bar code scanner to one of the Type A (wide) USB ports on the
rear of the scale, and then place the scanner into the cradle.
9
Optional:
Attach one of the following devices to the other Type A (wide) USB port on the rear of
the scale
(A)
:
Standard USB keyboard
Dymo SE450 USB Label Writer printer
NOTE
You can swap out keyboard, scanner, and printer as needed.
Each time that you change USB devices, disconnect and reconnect the power supply
to ensure that the newly connected devices are recognized.
10 Connect the power adapter to the power port on scale
(B)
and then plug the power adapter into
a 110VAC wall socket.
WARNING!
The scale
must
be operated with the supplied power adapter
only
. Before you connect the
power adapter to the outlet, check that the operating voltage on the power adapter matches
the local outlet voltage. If it does not, contact Parata Systems Customer Care.
Summary of Contents for AccuCount II
