Congratulations on your purchase of this precision audio component and thank you for your selection of
Parasound. Your P/LD-1100 Line Drive Preamplifier has been designed with the latest technology to
become the heart of the finest music systems. Premium parts and advanced design by renowned circuit
designer John Curl combined with full remote control make the P/LD-1100 one of the finest preamplifier
values ever offered.
Please take a few moments now to read these instructions thoroughly so you may fully understand the
sophisticated capabilities of your new preamplifier.
Unpacking and Placement
Open the carton of your P/LD-1100 carefully and inspect the unit for possible shipping damage. Report
any damage to your dealer immediately. You will find the detachable AC line cord packed separately
inside the carton.
Save your plastic bag, inserts, and carton. You may need these later for transporting the P/LD-1100 or for
shipment in the event it ever requires factory service. Record the serial number (on rear panel) here for
future reference: ____________________
Locate your P/LD-1100 as close as possible to your source components and power amplifier. Keep it out
of direct sunlight, and away from heat sources such as a hot air vent or radiator. If you are stacking your
components, avoid placing your P/LD-1100 on top of heat producing components, such as power
amplifiers or tube-type preamplifiers.
O W N E R ' S M A N U A L
P/ L D -110 0 Line Drive Prea mpl i f ier
P / L D - 1 1 0 0 L i n e D r i v e P r e a m p l i f i e r
P / L D - 1 1 0 0 L i n e D r i v e P r e a m p l i f i e r
P o w e r
P o w e r
M u t e
M u t e
T a p e
T a p e
A u x
A u x
V i d e o
V i d e o
T u n e r
T u n e r
C D
C D
D i r e c t
D i r e c t
B a l a n c e
B a l a n c e
V o l u m e
V o l u m e
