18
1. Turn the power off to filtration system pump at circuit breaker.
2. Remove three screws in left end side cap labeled “electrical connections”. (Fig. 33)
3. Remove side cap. (Fig. 34)
4. Grasp light bulb plug and pull light out about one inch. (Fig. 35)
5. Remove plug from light bulb. (Fig. 36)
6. Pull light bulb free from Clear O3® unit. (Fig. 37)
7. Make sure gasket is in place on replacement light bulb.
8. Align with key and slide into hole until bulb seats firmly and completely into unit.
(Fig. 38)
9. Press plug onto light bulb.
10. Replace side cap and three screws.
11. Turn on power to filtration system pump.
12. Check glow tube on the left front of the Clear O3®. A light blue light indicates
lamp is lit and the unit should be producing ozone.
Fig. 34
Fig. 37
Fig. 35
Fig. 38
Fig. 33
Fig. 36