background image

12 

Risk Assessment 

The following risk assessment covers the reasonably foreseeable hazards to health and safety arising from 

the mixer and from systems of work associated with this machine. 

Risk Rating

 

Extreme Risk 

Immediate action required. 

 

High Risk 

Senior management attention required. 

 

Moderate Risk 

Management responsibility must be specified. 

 

Low Risk 

Manage by routine procedures. 

Based on AS4360 1999 Risk Management. 

Hazard Identified 

Existing Controls 

Consequences 

Likelihood  Risk Rating 

Cleaning the machine with buckets of 
water or hoses is extremely dangerous 
and may lead to electrocution. The  
machine must be cleaned with a damp 
cloth only. 

Safe work cleaning practices 
included in training manual 
local workplace rules and 
management. 

Catastrophic 

Rare 

High 

Microswitch on safety guard should never 
be removed nor tampered with otherwise 
machine could continue working with 
moving parts exposed. 

Safe work guidelines  
reinforce non-authorised 
tampering with the machine.  
Access to microswitches 
service  item only. 

Major injuries 

Rare 

Moderate 

Electrical isolation switch should be fully 
accessible to the operator.  Recommend 
no more than 1.5 metres above the floor 
and within easy access by the operator. 

Dependent on bakery  
electrical policy. 

Major injuries 

Rare 

High 

Safety guard should not be removed. 

Microswitch interlocked with 
machine - controls will not 
operate. 

Major injuries 

Unlikely 

Moderate 

Service panels should not be removed 
whilst the machine is in operation nor still 
connected to the power supply.  The  
machine must not be operated with any 
service access panel removed. 

Machine designed to be  
accessed by authorised  
service technicians only.  
Warning signs clearly  
evident. 

Major injuries 

Unlikely 

Moderate 

Hands or arms should not be placed  
behind bowl whilst the machine is in  
operation. 

Safe operating procedure 
reinforces this not to be 
done. 
Warnings in place. 

Minor injuries 

Unlikely 

Low 

Hands should never be placed near dough 
hook whilst in motion. 

Bowl guarded during  
operation.  Safe operating 
procedures highlight safe 
work. 

Major injuries 

Unlikely 

Moderate 

Cleaning of the machine should not take 
place whilst it is in operation nor still  
connected to the power supply. 

Correct cleaning procedure 
detailed in training  
procedure. 

Major injuries 

Unlikely 

Moderate 

The machine should never be connected 
to alternate power source other than that 
which it has been designed for and  
specified within this manual. 

External plug designed to 
Australian / New Zealand 
standards for the appropriate 
power supply. 
Warnings in manual. 

Major injuries 

Rare 

Moderate 

Owners and Operators of Paramount Equipment Please Note: 

The risk ratings and control measures as outlined in this manual must be incorporated into your safety 

management systems and procedures.  Ensure effective risk control by reinforcing these procedures with 

staff.  For example:  Never clean any electrical equipment with buckets of water or pressurised hoses. 

Summary of Contents for BM30ATS


















Reviews: