Web Site:
www.parallax.com
Forums:
forums.parallax.com
Sales:
Technical:
Office:
(916) 624-8333
Fax:
(916) 624-8003
Sales:
(888) 512-1024
Tech Support:
(888) 997-8267
© Parallax, Inc. • Proto-DB (2010.12.10)
Page 1 of 6
Proto-DB (#28310):
Prototyping Daughterboard
General Description
The Proto-DB provides the means to build your own circuits that interface with the MoBoStamp-pe and/or
the MoBoProp motherboards.
Features
•
Plug-compatible with Parallax motherboards.
•
Ground plane for quiet operation.
•
70 uncommitted plated through-holes on a 0.1” grid for your components.
•
14 grounded through-holes.
•
7 plated through-holes each in two uncommitted voltage busses.
•
11 connecting pads for daughterboard connector supply lines and signals.
Application Ideas
•
Robotic Controls.
•
Custom Sensors.
•
Data Acquisition Circuitry.
•
Industrial Control I/O.
•
Pushbuttons and LEDs.
What’s Included
What You Need to Provide
•
Components and wires.
•
Filter and bypass capacitors.
•
Parallax motherboard or DB-Expander.
•
Connector(s) to the outside world.
•
Your imagination!
Assembly
The Proto-DB comes in kit form with the circuit board and motherboard connector separate. If you are
using the Proto-DB with a Parallax motherboard, you will need to solder the connector to the board.
1 ea. Bare prototyping board
and daughterboard connector.
