6.
Connectors and Indicators
Front Panel
6.1
LED Indicators
The Front Panel LEDs display the status of the switch and the associated port connections as
indicated in the table below:
LED
Name
Colour
State
Status
PWR
Power
Green
OFF
Unit Power Off
ON
Unit Power On
PoE 1/2
PoE Output Power
Green
OFF
PoE Output On
ON
PoE Output Off
6.2
RJ45 Ports
The Front Panel has 2 RJ45 Ports; the DATA IN Ports is used as the Data Input Port and are not PoE
compatible. The PoE OUT Ports should be used to connect directly to PoE devices.
6.3
Power Supply Connector
Model No
V-
V+
Power Input
PDT-PIN-7002-MP-I
GND
+12-48VDC
Note: All Power Supplies should provide over-current and short-circuit protection and should have
a capacity rating to meet the required output current for the device.
