Paradyne Hotwire 7976, User Manual, Page: 70 / 120

Messages and Troubleshooting
6-4
7976-A2-GB20-10 August 1998
Table 6-1. Device Messages (2 of 2)
Device Message What To Do What Message Indicates
Limit of six Login IDs
reached An attempt to enter a new
login ID was made, and the
limit of six login/password
combinations has been
reached. 1. Delete another login/password
combination.
2. Reenter the new login ID.
No Security Records
to Delete Delete was selected from
the Administer Login
screen, and no security
records had been defined.
H
No action needed.
H
Enter a security record.
Password Matching
Error – Re-enter
Password Password entered in the
Reenter Password field of
the Administer Logins
screen does not match
what was entered in the
Password field.
H
Try again.
H
Contact your system
administrator to verify your
password.
Please Wait Command takes longer
than 5 seconds. Wait until message clears.
Test Active A test is running and no
higher priority health and
status messages exist.
H
Contact service provider if test
initiated by the network.
H
Wait until the other test ends
and message clears.
H
Cancel all tests from the Test
screen.
H
Stop the test from the same
screen the test was started
from.
0.0.0.0 is an invalid
IP address An IP address of all zeroes
was entered. Enter a valid, non-zero IP
address.