v
7975-A2-GB20-40
December 1998
About This Guide
Document Purpose and Intended Audience
This guide contains information needed to set up, configure, and operate the
Hotwire 7975 Multirate/Symmetric Digital Subscriber Line (M/SDSL) Standalone
Termination Unit and is intended for installers and operators.
Document Summary
Section
Description
Chapter 1
About the 7975 Standalone Termination Unit. Describes the
7975 Termination Unit’s features and capabilities.
Chapter 2
Using the Asynchronous Terminal Interface. Provides
instructions for accessing the user interface and navigating
through the screens.
Chapter 3
Initial Startup and Configuration. Provides procedures for
setting up the user interface and configuration steps.
Chapter 4
Monitoring the Unit. Describes using the LEDs, status, and
network statistics to monitor the unit.
Chapter 5
Testing. Provides information about available tests and test
setup.
Chapter 6
Messages and Troubleshooting. Provides information on
SNMP traps, device messages, and troubleshooting.
Chapter 7
Security. Presents procedures for creating a login, setting
the effective access levels, and controlling SNMP access.
Chapter 8
IP Addressing. Provides information and examples
regarding IP addresses.
