Paradyne FrameSaver SLV 9124, Technical Reference

Page: 205 / 346

Security
9-5
9124-A2-GH30-00 June 1999 - Preliminary
Limiting Telnet or FTP Access Over the TS Management Link
"
Procedure
To limit Telnet or FTP access when the session is on the TS Management Link:
1. Go to the Telnet and FTP Session Options screen.
Main Menu
→
Configuration
→
Management and Communication
→
Telnet and FTP Sessions
2. Set the following configuration options, as appropriate.
— Set Telnet Session to Disable.
— Set FTP Session to Disable.
3. Return to the Management and Communication menu and select Node IP.
4. Set the following configuration options, as appropriate.
To . . . Set the configuration option . . .
Disable access via a
TS Management Link TS Management Link to None.
Assign an access level to the
TS Management Link TS Management Access Level to Level-2
or Level-3.
NOTE: Regardless of a user’s login access
level, a user cannot operate at a level higher
than the access level specified for the session
(e.g., if a user has a Level-1 login and Level-2
telnet access has been set, the Level-1 user
can only operate as a Level-2 user).
If you are going to allow users to configure the
unit, keep the access at Level-1.
5. Save your changes.
See Configuring Telnet and/or FTP Session Support or Configuring Node IP
Information in Chapter 8, Configuration Options, for more information about these
configuration options.