manualshive.com logo in svg

Paradyne COMSPHERE 6800 Series, Command Reference Manual

The Paradyne COMSPHERE 6800 Series is a cutting-edge telecommunications product designed to revolutionize connectivity. Our comprehensive manual provides step-by-step Installation and Enabling/Disabling Instructions, allowing users to seamlessly set up and configure the device. Download this manual for free from our website to unlock the full potential of your Paradyne COMSPHERE 6800 Series.

Share
Download
background image

2

Modem/DSU Commands

2-11

6800-A2-GB31-20

January 1997

Call Detail Display (cded)

Use the cded command to obtain a report that displays detailed information about COMSPHERE
3800/3900 Series modem calls. Information is retrieved from the call detail database. For each call,
this information includes the following:

•

Device name of the local modem

•

Device name of the remote modem (Available, only if the call was placed in Maintenance
mode)

•

Connect time for the call

•

Call duration

•

Line speed of the call

•

The reason the call disconnected

For most commands, NMS enables you to specify the destination for the command’s results and
schedule its execution. If the last page of the input form cannot accommodate the Destination for
results and Schedule execution fields, an additional page is provided. For a complete description
of these fields, refer to Chapter 1, Introduction.

Access Level:

Help desk, Data Technician, Manager, System Administrator

Abbreviation:

Abbreviation: cded

Restrictions:

Only Model 3811 modems are included in the data used to calculate results.
If you specify another 3800 Series modem model number, the results form 
will display a list of these modems indicating they are not included in the 
results.

Routine:

Yes

Schedule:

Yes

Related Commands: Daily Historical Utilization (dhu) 

Call Occurrence Distribution (cod) 
Call Duration Distribution (cdud)

Call Detail Display Input Form

The Call Detail Display input form contains the following fields:

Device(s) (Required field)

Enter the device(s) for which call detail information will be displayed. One or more
devices may be specified. Standard addressing format applies to the input. For
information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series
Network Management System User’s/System Administrator’s Guide.

REPORT PERIOD

Enter a report period for generation of the report. The report will include call information
from the starting date to the ending date specified.

Summary of Contents for COMSPHERE 6800 Series














































































































































































































































Reviews:

No comments

Related manuals for COMSPHERE 6800 Series

Comtech EF Data CDM-600L Installation And Operation Manual preview
CDM-600L
Brand: Comtech EF Data Pages: 206
Flexitron Mtx MTX-STARENERGY-M User Manual preview
Mtx MTX-STARENERGY-M
Brand: Flexitron Pages: 41
NETGEAR Nighthawk C7000 Quick Start Manual preview
Nighthawk C7000
Brand: NETGEAR Pages: 18
VisionTek 81GR User Manual preview
81GR
Brand: VisionTek Pages: 6
Dynamix UM-S Series Quick Start Manual preview
UM-S Series
Brand: Dynamix Pages: 2
KWorld Plus TV PVR-TV 305U Installation Manual preview
Plus TV PVR-TV 305U
Brand: KWorld Pages: 9
XtendLan G.SHDSL .bis NTU Series User Manual preview
G.SHDSL .bis NTU Series
Brand: XtendLan Pages: 166
Multi-Tech MultiConnect microCell MTCM2-L4G1 User Manual preview
MultiConnect microCell MTCM2-L4G1
Brand: Multi-Tech Pages: 27
Belkin F5D7632 User Manual preview
F5D7632
Brand: Belkin Pages: 24
Belkin F5D5630au User Manual preview
F5D5630au
Brand: Belkin Pages: 28
Belkin F5D5630au4 User Manual preview
F5D5630au4
Brand: Belkin Pages: 28
Enfora GPRS User Manual preview
GPRS
Brand: Enfora Pages: 23
Ebyte NA111-A User Manual preview
NA111-A
Brand: Ebyte Pages: 32
Gigaset Gigaset SE680 WiMAX User Manual preview
Gigaset SE680 WiMAX
Brand: Gigaset Pages: 62
Gigaset Gigaset SE587 WLAN dsl User Manual preview
Gigaset SE587 WLAN dsl
Brand: Gigaset Pages: 89
ETEK TD-8011 User Manual preview
TD-8011
Brand: ETEK Pages: 14
NETGEAR DM111Pv2 - ADSL2+ Ethernet Modem Setup Manual preview
DM111Pv2 - ADSL2+ Ethernet Modem
Brand: NETGEAR Pages: 26
Four-Faith F7916 Series User Manual preview
F7916 Series
Brand: Four-Faith Pages: 37

Brands by name

Popular brands

Load more brands