manualshive.com logo in svg

Paradyne COMSPHERE 6800 Series, Command Reference Manual

The Paradyne COMSPHERE 6800 Series is a cutting-edge telecommunications product designed to revolutionize connectivity. Our comprehensive manual provides step-by-step Installation and Enabling/Disabling Instructions, allowing users to seamlessly set up and configure the device. Download this manual for free from our website to unlock the full potential of your Paradyne COMSPHERE 6800 Series.

Share
Download
background image

2

Modem/DSU Commands

2-165

6800-A2-GB31-20

January 1997

Identity (id)

Use the id command to obtain information on a DATAPHONE II or COMSPHERE devices.

The command options enable you to update the model, serial number, and the product type
information in the device profile for a device you are upgrading, or you can choose to view the
device identification information without updating the device profile.

The results of this command originate from the device itself and not from the device profile
database.

For most commands, NMS enables you to specify the destination for the command’s results and
schedule its execution. If the last page of the input form cannot accommodate the Destination for
results and Schedule execution fields, an additional page is provided. For a complete description
of these fields, refer to Chapter 1, Introduction.

Access Level:

Help Desk, Data Technician, Manager, System Administrator

Abbreviation:

id

Restrictions:

None

Routine:

Yes

Schedule:

Yes

Related Commands: None

Identity Input Form

This input form contains the following fields:

Device(s) (Required field)

Enter the device(s) from which identity information will be obtained. One or more
devices may be specified. Standard addressing format applies to the input. For
information on device addressing, refer to Appendix D of the COMSPHERE 6800 Series
Network Management System User’s/System Administrator’s Guide.

Update device profile (Required field)

Specify whether or not the Model, Serial Number, Version Number, and Product Type
fields in the device profiles should be automatically updated with information returned
from the device. Valid entries are yes, no.

A pop-up menu is available listing valid selections.

Identity Command Results Forms

Different results forms display depending on the device specified. The results forms list device
information for each device and the identity information returned from the device. Figure 2-55 is a
sample of Page 1 of the Identity (id) command results forms for a 3400/4400 Series modem.
Depending on the model of the modem and its configuration, some of the fields may not be
displayed. A results form similar to the 3400/4400 Series modem results form will display for a
3600 Series DSU (Figure 2-56). For 3600 Series DSUs with the LPDA-2 option installed, a
module information field also displays on the results form. Results forms are also displayed for
COMSPHERE 3800 Series and 3900 Series modems.

Summary of Contents for COMSPHERE 6800 Series














































































































































































































































Reviews:

No comments

Related manuals for COMSPHERE 6800 Series

ICP DAS USA ZT-USBC Linux User Manual preview
ZT-USBC
Brand: ICP DAS USA Pages: 4
ICP DAS USA RFU-433 Quick Start Manual preview
RFU-433
Brand: ICP DAS USA Pages: 4
ICP DAS USA LRA-900-E Firmware Update preview
LRA-900-E
Brand: ICP DAS USA Pages: 21
ICP DAS USA LRA-900-E Quick Start Manual preview
LRA-900-E
Brand: ICP DAS USA Pages: 6
Elcon Elconnect Coax Client VoIP Operating Instructions Manual preview
Elconnect Coax Client VoIP
Brand: Elcon Pages: 32
H3C MSR 3610 Manual preview
MSR 3610
Brand: H3C Pages: 54
Zte MF10 User Manual preview
MF10
Brand: Zte Pages: 36
Toshiba PCX1000 Owner'S Manual preview
PCX1000
Brand: Toshiba Pages: 18
Toshiba PCX1100 - DOCSIS Cable Modem Owner'S Manual preview
PCX1100 - DOCSIS Cable Modem
Brand: Toshiba Pages: 21
Toshiba PCX2500 Owner'S Manual preview
PCX2500
Brand: Toshiba Pages: 22
Toshiba DAZ8823A Owner'S Manual preview
DAZ8823A
Brand: Toshiba Pages: 22
Toshiba DAZ8817F Owner'S Manual preview
DAZ8817F
Brand: Toshiba Pages: 22
Toshiba DOCSIS DAZ8820F Owner'S Manual preview
DOCSIS DAZ8820F
Brand: Toshiba Pages: 22
Toshiba P000233790 Owner'S Manual preview
P000233790
Brand: Toshiba Pages: 53
Patton electronics 1045 User Manual preview
1045
Brand: Patton electronics Pages: 10
VKOM 303UB User Manual preview
303UB
Brand: VKOM Pages: 24
Zte MF833V Quick Start Manual preview
MF833V
Brand: Zte Pages: 11
Cygnus 850 Quick Start Installation Manual preview
850
Brand: Cygnus Pages: 6

Brands by name

Popular brands

Load more brands