manualshive.com logo in svg

Paradyne COMSPHERE 6800 Series, Command Reference Manual

The Paradyne COMSPHERE 6800 Series is a cutting-edge telecommunications product designed to revolutionize connectivity. Our comprehensive manual provides step-by-step Installation and Enabling/Disabling Instructions, allowing users to seamlessly set up and configure the device. Download this manual for free from our website to unlock the full potential of your Paradyne COMSPHERE 6800 Series.

Share
Download
background image

COMSPHERE 6800 Series Network Management System

2-144

January 1997

6800-A2-GB31-20

Download Device Firmware (dndf) 
(Disruptive)

Use the dndf command to download device firmware from the 6800 Series NMS into
COMSPHERE 3400/4400 Series modems, COMSPHERE 3800 Series modems, or COMSPHERE
3900 Series modems. This command allows you to upgrade your modems with new modem
features or modulation schemes through the 6800 Series NMS.

Before executing this command, you must transfer the firmware files from the floppy disk
provided by Paradyne to the 6800 Series NMS. To do this, select option 8, Download modem
firmware file option, accessed from the NMS administration menu.

For 3800 Series modems, there are two types of firmware upgrade: local and remote.

•

Local download: To upgrade a local 3800 Series modem, use a firmware upgrade floppy
disk in the 6800 Series NMS floppy drive. The 6800 Series NMS can download to a single
local modem; or it can download to multiple local modems on a control channel in parallel
using a broadcast mechanism of the 3800 Series modems.

•

Remote download: To upgrade a remote 3800 Series modem, use a local 3800 Series modem
to ‘‘clone” the remote 3800 Series modem with a replica of its firmware. Only one modem
at a time can be selected for remote download (i.e., cloning).

For 3900 Series modems, there are two types of firmware upgrade: local and remote.

•

Local download: To upgrade a local 3900 Series modem, use a firmware upgrade floppy
disk in the 6800 Series NMS floppy drive. The 6800 Series NMS can download to a single
local modem; or it can download to multiple local modems on a control channel in parallel
using a broadcast mechanism of the 3900 Series modems.

•

Remote download: To upgrade a remote 3900 Series modem, use a local 3900 Series modem
as the download master to ‘‘clone” the remote 3900 Series modem(s) with a replica of its
firmware. This can be done by cloning to a single remote modem with point-to-point
configuration.

For most commands, NMS enables you to specify the destination for the command’s results and
schedule its execution. If the last page of the input form cannot accommodate the Destination for
results and Schedule execution fields, an additional page is provided. For a complete description
of these fields, refer to Chapter 1, Introduction.

Access Level:

Data Technician, Manager, System Administrator

Abbreviation:

dndf

Restrictions:

This command cannot be sent to both 3800/3900 Series modems and 
3400/4400 Series modems in a single command execution. Multiple 
3800/3900 Series modem selections cannot span more than one control 
channel.

Downloading device firmware from the 6800 Series NMS into the 
COMSPHERE modems may take up to 4 hours for a local download.

Routine:

Yes

Schedule:

Yes

Related Commands: None

Summary of Contents for COMSPHERE 6800 Series














































































































































































































































Reviews:

No comments

Related manuals for COMSPHERE 6800 Series

NAL A3LA-RG User Manual preview
A3LA-RG
Brand: NAL Pages: 180
NAL A3LA-R General Description Manual preview
A3LA-R
Brand: NAL Pages: 107
Olive V-ME110 User Manual preview
V-ME110
Brand: Olive Pages: 38
Patton electronics 1002S User Manual preview
1002S
Brand: Patton electronics Pages: 8
DareGlobal DB120-WG User Manual preview
DB120-WG
Brand: DareGlobal Pages: 20
InfinitiKloud Gen 2 Charge User Manual preview
Gen 2 Charge
Brand: InfinitiKloud Pages: 2
MyRepublic Wi-Fi Hub+ Quick Start Manual preview
Wi-Fi Hub+
Brand: MyRepublic Pages: 7
Toshiba PCX1000 Owner'S Manual preview
PCX1000
Brand: Toshiba Pages: 18
Toshiba PCX1100 - DOCSIS Cable Modem Owner'S Manual preview
PCX1100 - DOCSIS Cable Modem
Brand: Toshiba Pages: 21
Toshiba PCX2500 Owner'S Manual preview
PCX2500
Brand: Toshiba Pages: 22
Toshiba DAZ8823A Owner'S Manual preview
DAZ8823A
Brand: Toshiba Pages: 22
Toshiba DAZ8817F Owner'S Manual preview
DAZ8817F
Brand: Toshiba Pages: 22
Toshiba DOCSIS DAZ8820F Owner'S Manual preview
DOCSIS DAZ8820F
Brand: Toshiba Pages: 22
Toshiba P000233790 Owner'S Manual preview
P000233790
Brand: Toshiba Pages: 53
Huawei E303 Quick Start Manual preview
E303
Brand: Huawei Pages: 3
B&B Electronics X09-009PKC-EA Product Information preview
X09-009PKC-EA
Brand: B&B Electronics Pages: 2
RACOM RipEX2 User Manual preview
RipEX2
Brand: RACOM Pages: 248
Hamlet HRDSL524 User Manual preview
HRDSL524
Brand: Hamlet Pages: 62

Brands by name

Popular brands

Load more brands