COMSPHERE 6800 Series Network Management System
2-140
January 1997
6800-A2-GB31-20
Display Telephone Number(s) (dstn)
Use the dstn command to display the telephone number(s) in a COMSPHERE 3400/4400 Series
modem equipped with an Auto Call, Auto Answer (ACAA) unit, or the local telephone number
associated with a COMSPHERE 3600 Series DBM. For more information on the fields that appear
on the screen, see the Change Telephone Number(s) (chtn) command. For most commands, NMS
enables you to specify the destination for the command’s results and schedule its execution. If the
last page of the input form cannot accommodate the Destination for results and Schedule
execution fields, an additional page is provided. For a complete description of these fields, refer to
Chapter 1, Introduction.
Access Level:
Help Desk, Data Technician, Manager, System Administrator
Abbreviation:
dstn
Restrictions:
None
Routine:
Yes
Schedule:
Yes
Related Commands: Change Telephone Number(s) (chtn)
Display Telephone Number(s) Input Form
This input form contains the following field:
Device (Required field)
Enter the device whose telephone numbers are to be displayed. Standard addressing
format applies to the input. For information on device addressing, refer to Appendix D of
the COMSPHERE 6800 Series Network Management System User’s/ System
Administrator’s Guide.
Display Telephone Number(s) Results Form
Figure 2-44 is a sample of the Display Telephone Number(s) results form for 3400/4400 Series
modems.
