Paradyne BitStorm 2400, User Manual

Page: 66 / 90

4. Using the Web Interface
4-24
December 2002 2400-A2-GB20-10
VLAN/GVRP (GARP VLAN Registration Protocol) Port Configuration
The VLAN/GVRP Ports option allows you to modify VLAN/GVRP settings for each
port.
Figure 4-14. VLAN/GVRP Port Configuration
This page lets you modify the VLAN/GVRP configuration for each port. To change
the parameters for a specific port, select the port number from the Port pull-down
box. Information for that port will then be displayed in the editable row at the top of
the table. You can then modify the following fields:
Field Description
Priority This field specifies the default ingress User Priority for this port.
This only has effect on media, such as Ethernet, that do not support
native User Priority. This priority also applies to all untagged
frames.
PVID This field specifies the VLAN ID assigned to untagged frames or
Priority-Tagged frames on this port. The VLAN ID must refer to a
valid VLAN in the current VLAN configuration (decimal number).
Acceptable Frames This field describes acceptable frames. You can choose all or
tagged-only. When this field is set to tagged-only, the switch will
discard untagged frames or Priority-Tagged frames received on this
port. When all is selected, all frames will be accepted and assigned
to the PVID for this port.