Paradyne BitStorm 2400, User Manual

Page: 64 / 90

4. Using the Web Interface
4-22
December 2002 2400-A2-GB20-10
This page displays all currently active Virtual Local Area Networks (VLANs)
configured for the switch. The following information is available for each VLAN:
Click on Next to view the next page of VLANs or click on Refresh to refresh the list.
Static VLAN Configuration
The Static VLANs option allows you to create and delete static VLANs.
Figure 4-13. Static VLAN Configuration
Field Description
VID VLAN ID. This field indicates the VLAN ID for this group.
FID Filtering ID. This is the filtering database used by this VLAN.
Status This field displays the status of the VLAN.
Create Time This is a time stamp indicating when the last VLAN was created
since the last BitStorm 2400 reboot. Create time of “0” throughout
all fields means that the VLAN was created by to reboot.
Port Member Status The remaining portion of this row indicates the state of each port in
this VLAN. There is a string of twelve characters in this row with
each character representing one port on the switch. The first
character represents port one while the second character
represents port two, etc. The character for a specific port
represents the state it is in for this VLAN. The following states are
defined:
!
–: Not included in VLAN
!
M: Member of VLAN (receive all designated packets)
!
F: Forbidden Access (will not receive all designated packets)
!
U: Untagged Member