Paradyne BitStorm 2400, User Manual, Page: 52 / 90

4. Using the Web Interface
4-10
December 2002 2400-A2-GB20-10
Serial Configuration
The Serial option allows you to modify the baud rate and view other serial port
settings.
Figure 4-6. Serial Configuration
Select a baud rate from the drop-down menu, then click on Apply. The default and
recommended baud rate is 19200, which is the rate used by the boot code. If you
change the operating system baud rate to a different value, you may create a
situation where only the initial boot messages are readable, or only messages sent
after the boot process is complete are readable.
The following information is read-only:
!
Character Size
!
Parity
!
Stop Bits
!
Flow Control
Click on Apply or Save to activate changes.