Paradyne 9121, User Manual, Page: 35 / 73

Displaying System Information
4-11
9121-A2-GB20-00 June 1997
Test Status Messages:
These test messages appear in the right-most column of the System and Test
Status screen.
Message What It Indicates What To Do
No Test Active No tests are currently
running. No action needed.
DSX-1 LLB Test Active A DSX-1 Line Loopback
(LLB) test is active. Allow the loopback to continue
or abort the test.
Press Return (
↵
) while the
loopback is selected (via the
Command column) on the
DSX-1 Physical Tests screen
( Path: main/test/dsx _ phy) to
activate or deactivate the test.
DSX-1 PLB Test
Active A DSX-1 Payload
Loopback (PLB) test is
active. Allow the loopback to continue
or abort the test.
Press Return (
↵
) while the
loopback is selected (via the
Command column) on the
DSX-1 Physical Tests screen
( Path: main/test/dsx _ phy) to
activate or deactivate the test.
DSX-1 RLB Test
Active A DSX-1 Repeater
Loopback (RLB) test is
active. Allow the loopback to continue
or abort the test.
Press Return (
↵
) while the
loopback is selected (via the
Command column) on the
DSX-1 Physical Tests screen
( Path: main/test/dsx _ phy) to
activate or deactivate the test.
DTE External LB,
Port-
n
An external DTE Loopback
is running on the selected
port ( Port-1 or Port-2 ). Allow the loopback to continue
or abort the test.
Press Return (
↵
) while the
loopback is selected (via the
Command column) on the
port’s Physical Tests screen
( Path: main/test/port-
n_ phy)
to activate or deactivate the
test.
DTE Initiated Ext. LB
Port-
n
DTE has initiated an
external DTE Loopback on
the selected port ( Port-1 or
Port-2 ). No action needed; allow the
test to continue.
Check the DTE.
FCC Test Active Should never see this
message. Call your service representative
for assistance.