Paradox ParaVox, User Manual

Page: 15 / 24

ParaVox 13
4.4 C
HANGE
U
SER
PIN (D
EFAULT
: 1234)
The ParaVox system supports up to four user PINs, which can be 4 or 6 digits in
length as programmed by your installer.
After entering the User's Programming Mode, press the [4] key to enter the Change
User PIN menu and enter the new PIN twice. After entering the PIN twice the
ParaVox automatically saves the PIN into a User PIN location. Only the PIN used to
enter the User's Opening Menu can be changed. The [*] key can be pressed at any
time to exit without saving.
Programming a user PIN for the first time:
Enter the User's Main Menu using the default User PIN (1234). Then change
the PIN to the desired number. To program subsequent User PINs, exit and
re-enter the User's Main Menu using the default PIN.
EXAMPLE:
In the following example notice how the messages are linked to the
triggered zone and not the telephone numbers.
Zone 4 is programmed to dial telephone number locations 1 and 2. When
zone 4 has triggered, the ParaVox will dial the telephone number stored in
"telephone number location 1". After the Post Dial Delay, the ParaVox will
play the message recorded in "Voice Message Location 4". The ParaVox
will proceed by dialing the number recorded in "telephone number location
1". After the Post Dial Delay, the ParaVox will play the message recorded
in "Voice Message Location 4".