2
IPC10 Overview
Figure 2
LED Indicators
LED
Description
Reset
Use pin to press the reset button. Momentary press will restart the converter.
Note: All stored evets will be erased upon reboot.
Reset to default
- Press for at least 10 seconds and depress. LEDs will shut down and the IPC10 will restart; all values
will be set to default and
all data (including events) will be deleted
.
Power
Green
– Power ON
Events
Green blinking
– Data transmission from reporting devices
MQTT
Green
– MQTT active
Gateway
Green - Valid gateway
CMS
Green
– Connected to the CMS
Amber blinking
– Transmitting data to the CMS
User
Green
– User connected to the IPC10 web page
Location and Mounting
The IPC10 can be mounted on a
19” (48.3 cm) rack.
Hardware Installation
Connect the Ethernet cable from the router with POE to the Ethernet port located in the front of the IPC10 Converter, refer to Figure 2.
Note!
: It is strongly recommended to have the POE router connected to a professional UPS to avoid loss monitoring in case of power failure.
MQTT
LED
User
LED
CMS
LED
N/A
N/A
Power
LED
Ethernet
Port
Mounting
Holes
Reset
Switch
Events
LED
Gateway
LED