Paradox Esprit E55, Programming Manual

Page: 8 / 48

6 Programming Guide
Zone Definitions
To program zone definitions, zone partitions and assign options:
Table 1: Zone Definitions
Step Action Details
1 [
ENTER
] + [
INSTALLER CODE
]
(default: 0000 / 000000)
[
ARM
] + [
STAY
] = flash. [
MAINTENANCE CODE
] may also be used.
2 Enter 3-digit zone you wish to program
[001] to [032]
[
ARM
] + [
STAY
] = on (see table on page 7)
3 Enter a 2-digit zone definition 2 digits: 01 to 32 (see Table 1 below)
4 Assign Partition
[1] , [2] or [3]
By default, all zones are assigned to partition 1. (see Table 2)
5 Select or deselect zone options using
buttons
[1] to [8]
See Table 3 for zone options. ON = feature activated
See Table 4 for keyswitch options. OFF = feature deactivated
6 To save and proceed to the next zone,
press
[
ENTER
]
Zone Definitions Stay Arm Sleep Arm Fully Arm Zone Definitions
00 = Zone Disabled (default) - - - 11 = Instant Fire†
01 = Entry Delay 1 Entry Delay 1 Entry Delay 1 Entry Delay 1 12 = Delayed Fire†
02 = Entry Delay 2 Entry Delay 2 Entry Delay 2 Entry Delay 2 13 = Instant Fire Silent†
03 = Entry Delay 1 (Full Arm) Not Armed Not Armed Entry Delay 1 14 = Delayed Fire Silent†
04 = Entry Delay2 (Full Arm) Not Armed Not Armed Entry Delay 2 15 = 24Hr. Buzzer
05 = Follow Follow * Follow * Follow * 16 = 24Hr. Burglary
06 = Follow (Sleep/Full Arm) Not Armed Follow * Follow 17 = 24Hr. Hold-up
07 = Follow (Full Arm) Not Armed Not Armed Follow 18 = 24Hr. Gas
08 = Instant Instant * Instant * Instant * 19 = 24Hr. Heat
09 = Instant (Sleep/Full Arm) Not Armed Instant * Instant 20 = 24Hr. Water
10 = Instant (Full Arm) Not Armed Not Armed Instant 21 = 24Hr. Freeze
18 = 24Hr. Gas
* Flex-Instant = Zone will follow the delay at section [720], (default is 15 seconds / 0 = instant zone) 19 = 24Hr. Heat
** On-board hardwire control panel zones 1 to 4 (E55) or 1 to 9 (E65) 20 = 24Hr. Water
† Only on-board zones can be defined as fire zones 21 = 24Hr. Freeze
†† This alarm will follow the Panic 1 option (section [702], option [1]) 22 = 24hr. Panic††
23 = Follow No Pre-Alarm
NOTE: For more zone options, see sections [705] and [706] on page 8. 24 = Instant No Pre-Alarm
25 = Keyswitch Maintain**
26 = Keyswitch Momentary**
[1]- N/A
[2]- N/A
[3]- N/A
[4]
OFF = Disarm
ON = Disarm only if Stay/Sleep
armed
[5] = Arm only
[6] = Stay arming‡
[7] = Sleep arming‡
[8] = N/A
‡ Select only one. If all are off, key-
switch will regular arm.
[1] = Auto-zone Shutdown
[2] = Bypassable Zone
[3] = N/A
[4] [5]
OFF OFF Audible Alarm
OFF ON Pulsed Alarm
ON OFF Silent Alarm
ON ON Report Only
[6] = Intellizone
[7] = Delay alarm transmission
[8] = Force Zone
[1]- Partition 1 †
[2]- Partition 2†
[3]- Both partitions†
† When using a K636 keypad, only
partition 1 is available. To use both
partitions, use a K10V/H, K32, or K32I
keypad.
Table 2 Partition Assignment Table 3 Zone Options Table 4 Keyswitch Options