Proximity Reader 9
DISPLAY ON CARD READ
Section [004] - Default: [3]
The response from a card being presented to the
reader can be adjusted according to the
installation’s requirements.
Select [0] in Face Light Operation (see
page 12) to enable options [0] to [3] in
section [004] or select [1] in Face Light
Operation, (see page 12) to enable options
[4] to [7] in section [004].
* If section [103] (page 12) is set to [1],
the face light will also flash.
KEYPAD LOCKOUT
Section [005] - Default: [0]
The reader’s keypad comes with a feature that will
lock the keypad for 60 seconds when an installer
code is entered incorrectly 3 consecutive times.
Enter Description
[0]
Display on Card Read disabled
[1]
Red Status LED flashes*
[2]
Green Status LED flashes*
[3]
Red and green Status LEDs flash*
[4]
Face Light flashes
[5]
Face Light and red Status LED flash
[6]
Face Light and green Status LED flash
[7]
Face Light and both Status LEDs flash
