Step by step setup instructions to customize each setting.
Identifies functions and default features.
ARC
™
(Anthem Room Correction)
Wireless Setup
10
Learn Remote
11
Operation
ARC – Anthem Room Correction: Factory Default = Off
Enables or disables ARC
™
(Anthem Room Correction).
To enable ARC
™
, please refer to the “ARC
™
(Anthem Room Correction)” section in the
Owner’s Manual for the room calibration procedure.
Once ARC
™
has been completed and the file uploaded it will automatically be enabled.
Press
(Menu) on the Remote or the soundbar’s touch display.
Press
(Scroll Down) to scroll down to the ARC submenu.
Press (Scroll Right) or (Select) to select the ARC submenu.
Press (Scroll Down) to scroll down to the desired option, either Off or ON.
Once the desired option is displayed, press (Scroll Right) or (Select)
to select Off or ON.
If the selection was successful the soundbar’s display will indicate Saved.
Wireless Setup
This setup option allows you to Initialize Wi-Fi (PW Soundbar ONLY) or
Bluetooth Pairing activation.
PW Soundbar ONLY:
IMPORTANT! We recommend using an Ethernet connection when connecting the soundbar
to your network. This is the most reliable setup method.
To configure a Wireless Network please refer to the DTS Play-Fi
®
and Apple AirPlay Quick
Start Guide for complete instructions.
The connection methods vary between the Play-Fi app and AirPlay.
Wireless Setup:
Press (Menu) on the Remote or the soundbar’s touch display.
Press (Scroll Down) to scroll down to Wireless Setup. Press (Scroll Right) or (Select) to
select the Wireless Setup submenu.
Press (Scroll Down) to scroll down to Initialize WiFi (PW Soundbar ONLY) or Bluetooth Pairing.
Press (Scroll Right) or (Select) to select the Initialize WiFi or Bluetooth Pairing submenu.
Initialize Wifi ONLY:
Press
(Scroll Down) to scroll down to the desired option, either No or Yes.
If you selected Yes, the soundbar’s display will indicate Resetting.
If you selected No, the soundbar’s display will indicate No Changes made.
Bluetooth Pairing ONLY:
The soundbar’s display will now indicate pairing mode on.
Learn Remote
This function provides the ability to program a secondary remote. The soundbar will continue to
respond to the original remote and any programmed secondary remote that you wish to use
simultaneously.
For a complete list of programmable functions, please refer to the “The Menu System” section
in the Owner’s Manual.
If the operation was successful the display will indicate Saved.
If the operation was not successful the display will indicate Failed.
The operation will “Fail” if a command is already in use/programmed.
To Learn (program) a new remote:
Press (Menu) on the Remote or the soundbar’s touch display.
Press
(Scroll Down) to scroll down to Learn Remote.
Press
(Scroll Right) or (Select) to select the Learn Remote submenu.
Press (Scroll Down) to scroll down to the command you wish to program.
Press (Scroll Right) or (Select) to select the command submenu (For example: > ).
Push Button will be displayed on the soundbar’s display.
Holding the Secondary Remote remote approx 12” from the soundbar, push the button you wish
to program. The soundbar will then respond with “Push Button Again”. Holding the Secondary
Remote remote approx 12” from the soundbar, push the button a second time to confirm.
If your selection was successful the soundbar’s display will indicate Saved.
Power Settings:
Power Standby / Power On Volume / IP Control / Standby IP
To change the Power
Standby option:
Press (Menu) on the Remote or the
soundbar’s touch display.
Press (Scroll Down) to scroll down to
Power Settings. Press (Scroll Right)
or (Select) to select the Power Settings
submenu.
Press (Scroll Down) to scroll down to
Power Settings. Press (Scroll Right)
or (Select) to select the Power Standby
submenu.
Press (Scroll Down) to scroll down to the
desired option, either Auto Standby or Always
On.
Once the desired option is displayed, press
(Scroll Right) or (Select) to select Off
or On.
If your selection was successful the
soundbar’s display will indicate Saved.
To change the Power–on Vol:
Press (Menu) on the Remote or the
soundbar’s touch display.
Press (Scroll Down) to scroll down to
Power Settings. Press (Scroll Right)
or (Select) to select the Power Settings
submenu.
Press (Scroll Down) to scroll down to
Power-on Vol. Press (Scroll Right) or
(Select) to select the Power-on Vol submenu.
Press
(Scroll Down) to scroll down to the
desired option, either Set or Last Used. Press
(Scroll Right) or (Select) to select the
Set submenu.
To decrease the Power-On Volume setting,
press (Volume Down). To increase the
Power-On Volume setting, press (Volume
Up). When the desired level is displayed,
press (Scroll Right) or (Select) to select
the desired level.
If your selection was successful the
soundbar’s display will indicate Saved.
To enable IP Control:
Press (Menu) on the Remote or the
soundbar’s touch display.
Press (Scroll Down) to scroll down to
Power Settings. Press (Scroll Right)
or (Select) to select the Power Settings
submenu.
Press (Scroll Down) to scroll down to IP
Control. Press (Scroll Right) or (Select)
to select the IP Control submenu.
Press (Scroll Down) to scroll down to the
desired option, either Off or On. Once the
desired option is displayed, press (Scroll
Right) or (Select) to select Off or On.
If your selection was successful the
soundbar’s display will indicate Saved.
To enable Standby IP:
Press (Menu) on the Remote or the
soundbar’s touch display.
Press (Scroll Down) to scroll down to
Power Settings. Press (Scroll Right)
or (Select) to select the Power Settings
submenu.
Press (Scroll Down) to scroll down to
Standby IP. Press (Scroll Right) or
(Select) to select the Standby IP submenu.
Press (Scroll Down) to scroll down to the
desired option, either Off or On. Once the
desired option is displayed, press (Scroll
Right) or (Select) to select Off or On.
If your selection was successful the
soundbar’s display will indicate Saved.
POWER STANDBY: Factory Default =
Auto Standby
Configures the state of the soundbar’s
power on/Off to Auto Standby or Always On.
In Auto Standby the soundbar will power
down after 20 minutes if no signal is
detected.
POWER ON VOL: Factory Default = -35dB
Adjusts default volume level of the
soundbar when initially powered on.
It can be adjusted from -90dB to +10dB*.
*Maximum volume (+10dB) is not advised.
IP CONTROL: Factory Default: On
Enables/disables the state of the IP
control. This is only required if using an
Ethernet/Wi-Fi based home automation
system.
STANDBY IP: Factory Default = Off
Requires IP Control to be enabled in
order to function.
Standby IP allows the soundbar to receive
IP based commands while in standby
mode.
SETUP GUIDE
Source Name
This option allows users to create custom names for each input. Please refer to the ‘Menu Option: Source Name’ section in the Owner’s Manual for further details regarding this menu.
Service
This submenu offers the ability to perform factory resets and displays information about your soundbar’s current firmware versions & MAC addresses.
Press
(Menu) on the Remote or the soundbar’s touch display.
Press
(Scroll Down)
to scroll down to
Service
.
Press
(Scroll Right) or (Select) to select the Service submenu.
Please refer to the ‘Menu Option: Service’ section in the Owner’s Manual for further details regarding this submenu.
USB Upgrade
This menu option is used when performing a USB firmware update.
Press
(Menu) on the Remote or the soundbar’s touch display.
Press
(Scroll Down)
to scroll down to the
USB Upgrade submenu.
Press
(Scroll Right) or (Select) to select the USB Upgrade submenu.
Press
(Scroll Down)
to scroll down to
Upgrade All
.
Press
(Scroll Right) or (Select) to select Upgrade All. This will update your Soundbar’s USB firmware.
Please refer to the ‘USB Update’ section in the Owner’s Manual for further details regarding USB firmware updates.
User Tips
Each button on the remote corresponds to its dedicated input on the soundbar.
To access a specific input, simply select the corresponding button on the remote.
Pairing an additional device while on the Bluetooth input: Push & Hold the Bluetooth button on the remote for 4 seconds. The soundbar will emit a tone
confirming that the broadcast feature is now active and a new device can now be paired. Note! Once the tone is emitted, the original pairing will be cancelled along with the
media stream.
(PW Soundbar Only) Please refer to the Wireless Setup Guide for iOS and Mac Users for complete instructions on a Network Connection and playback via AirPlay.
Setting up Auto Power On Function (applies to North America ONLY):
To enable the Auto Power On Function, navigate the menu to the following location: Power Settings > Standby IP Control > On. With this setting enabled, the soundbar will
power on when a signal is detected from the Digital Optical or RCA Inputs.
Shown: Input Options on
Paradigm PW Soundbar
remote.
Paradigm SOUNDSTAGE Remote
PARADIGM ELECTRONICS INC.
PRINTING INK: Pantone 877 Silver
BASS MODE
NIGHT
NORMAL
BASS +
HDMI 1
HDMI ARC
BLUETOOTH
OPTICAL 1
OPTICAL 2
ANALOG 1
ANALOG 2
HDMI 2
HDMI 3
POWER
MENU
MUTE
9
7
8
rev. 113016 |
VQE1A875Z
