Card Reader Installation
ACS-1E and ACS-1EUL Installation
ACS-1E and ACS-1EUL Install and Service Manual
Ver 2
15
3.2.2 MMR and MMR-BT
The MMR and MMR-BT use Near Field Communication (NFC) to read contactless EMV cards and
mobile devices as well as magnetic stripe cards.
The MMR-BT integrates Beacon Technology to offer additional features. The Bluetooth Low Energy
(BLE) Beacon periodically transmits an ID number that can be recognized by mobile devices with Blue-
tooth enabled. Using a Parabit Software Development Kit, customers can trigger actions including
access control, extended time, and other features.
3.2.2.1 MMR Power Booster Module Installation (ACS-1E ONLY)
A power booster module (shown below) must be installed in the ACS-1E controller to provide required
DC voltage for the MMR.
