PHYSIO-PORT
User Manual Version 2017-11-12
- 12 -
4.2
Button functions
During an ongoing long-term blood pressure measurement, the recorder keys have the following
function
:
To start and stop a
measurement
To call the last measured values
or the last error message.
Event marking:
You have to press the info
button again, while the device
displays the last measured blood
pressure reading, to mark this
measurement. The device
confirms the successful marking
with “1111” on the LCD display.
The marking is shown in the
value table of the analysis
software.
For manual switching of the
Measurement intervals
between day and night phase
Note
The manual switching between day and night phase is only possible, only if two measuring intervals are
programmed and the day / night key is not deactivated.
If more or less measuring intervals have been set, then the day/night key has no influence on the
measuring distances.
