7-5
7.1.4. Sleep Time Setting
Set the Sleep Mode to lower the power consumption. Sleep Time Setting allows you to select
the idle time before the device enter into Sleep Mode. The default idle time is 1 minute.
1) Press "Menu" button to enter the menu interface.
2) Press direction pad "▲" or "▼" to select System Settings and press OK button.
3) Press direction pad "
▲
" or "
▼
" to select "4. Sleep Time Setting" and press OK button.
4) The direction pad "
▲
" or "
▼
" can be used to select "1 Minute", "5 Minutes", "15 Minutes",
"30 Minutes", and "60 Minutes".
M6200/M6500/
M
6550 Series
M6600 Series
Note:
• When the printer is in dormant status, you can wake it up just by pressing Power
Saving button, sending print/scan/
F
ax task, or opening or closing the output bin.
M6200/M6500/
M
6550 Series
M6600 Series
7.1.5. Auto shut-off setting
“Auto shut-off setting” to set off condition and off delay of printer.
1) Press “Menu” button to enter the menu interface.
2) Press direction pad “▲” or “▼” to select System Settings and press OK button.
3) Press direction key “▲” or “▼” to select options of “Auto off set”, press “OK” to set off
condition and off delay.
