Networking
Connecting the printer to a Wi
‑
Fi network
Make sure that Active Adapter is set to Auto. From the control panel, navigate to:
Settings
>
Network/Ports
>
Network Overview
>
Active Adapter
For non-touch-screen printer models, press
to navigate through the settings.
1
From the control panel, navigate to:
Settings
>
Network/Ports
>
Wireless
>
Setup On Printer Panel
For non-touch-screen printer models, press
to navigate through the settings.
2
Select a Wi
‑
Fi network, and then type the network password.
Note:
For Wi
‑
Fi
‑
network
‑
ready printer models, a prompt to set up the Wi
‑
Fi network appears during initial
setup.
Connecting the printer to a wireless network using Wi
‑
Fi Protected Setup
(WPS)
Before you begin, make sure that:
•
The access point (wireless router) is WPS
‑
certified or WPS
‑
compatible. For more information, see the
documentation that came with your access point.
•
A wireless network adapter is installed in your printer. For more information, see the instructions that came
with the adapter.
•
Active Adapter is set to Auto. From the control panel, navigate to:
Settings
>
Network/Ports
>
Network Overview
>
Active Adapter
For non-touch-screen printer models, press
to navigate through the settings.
Using the Push Button method
1
From the control panel, navigate to:
Settings
>
Network/Ports
>
Wireless
>
Wi
‑
Fi Protected Setup
>
Start Push Button Method
For non-touch-screen printer models, press
to navigate through the settings.
2
Follow the instructions on the display.
Using the personal identification number (PIN) method
1
From the control panel, navigate to:
Settings
>
Network/Ports
>
Wireless
>
Wi
‑
Fi Protected Setup
>
Start PIN Method
For non-touch-screen printer models, press
to navigate through the settings.
2
Copy the eight
‑
digit WPS PIN.
Set up, install, and configure
25
