3
Select an Address protocol type, and then do one of the following:
•
For HTTP and HTTPS, type the URL that you want to bookmark.
•
For HTTPS, make sure to use the host name instead of the IP address. For example, type
myWebsite.com/sample.pdf
instead of typing
123.123.123.123/sample.pdf
. Make sure that
the host name also matches the Common Name (CN) value in the server certificate. For more information
on obtaining the CN value in the server certificate, see the help information for your web browser.
•
For FTP, type the FTP address. For example,
myServer/myDirectory
. Enter the FTP port. Port 21 is
the default port for sending commands.
•
For SMB, type the network folder address. For example,
myServer/myShare/myFile.pdf
. Type the
network domain name.
•
If necessary, select the Authentication type for FTP and SMB.
To limit access to the bookmark, enter a PIN.
Note:
The application supports the following file types: PDF, JPEG, TIFF, and HTML-based web pages.
Other file types such as DOCX and XLXS are supported in some printer models.
4
Click
Save
.
Creating folders
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click
Bookmarks
>
Add Folder
, and then type a folder name.
Note:
To limit access to the folder, enter a PIN.
3
Click
Save
.
Note:
You can create folders or bookmarks inside a folder. To create a bookmark, see
.
Loading paper and specialty media
Setting the paper size and type
1
From the control panel, navigate to:
Settings
>
Paper
>
Tray Configuration
>
Paper Size/Type
> select a paper source
For non-touch-screen printer models, press
to navigate through the settings.
2
Set the paper size and type.
Set up, install, and configure
18
