background image

PANTHERA MOTORSPORTS 

YZ250-YZ250X Electric starter - Installation guide 

 

 

Returns and Exchanges 

General: 

All returns must be postmarked no later than 10 days from the original customer shipment date. 
Returns and exchanges must be in new condition and must include all instructions and original packing 
material. Customer pays all return shipping charges. Include a copy of your packing list and authorization 
number with all returns. 

Original shipping and handling charges are not refundable. Returns must be preauthorized by us and are 
subject to a 20% re-stocking fee. These amounts will be deducted from the original amount billed and 
the remaining balance will be credited to the original credit card or paypall account. 

Incorrect Item: 

If you received an incorrect item, we must be notified within 10 days of receipt of the shipment so that 
no extra charges will be incurred. We will replace incorrect items and pay the additional shipping 
charge. No returns of items will be accepted beyond 21 days of the original shipment date. 

Return Shipping Instructions: 

Return via prepaid mail only. Insure shipment for full value of purchase. Use original packaging. We are 
not responsible for packages lost during return shipping. 

Return/Exchange Instructions: 

Enclose a copy of your packing list along with detailed return/exchange instructions. 

 

All returns require prior authorization by e-mailing us at [email protected] . All return 
shipping charges will be the responsibility of the customer. No returns on items under $30.00 will be 
approved. Items must be returned within 90 days of the original order date in the original packaging 
with the labels intact. 

  

 

 

Summary of Contents for YZ250

















Reviews: