How to configure your Pantech UML290 for 3G use:
Step 1:
Download the Pantech Modem Utility by following the instructions at this link:
Click to
download Pantech Modem Utility
(
WINDOWS ONLY
)
http://3gstore.com/site/download_form.html?u=pantech-uml290-fix
Step 2:
Install the Pantech Modem Configuration Tool on a Windows computer
Step 3:
With your UML290 inserted into your computer but NOT connected to the network,
launch the Pantech Modem Application
Step 4:
Click the "read" button - this will read the current settings of your Pantech UML290.
Step 5:
Under "Pref_mode", check the "CDMA/HDR Only" optoin. In the "HDR Service
Configuration" section, check the "Rev A" option. Your settings should look like the below
sample:
Pantech UML290 Prefer Mode Tool Version 1.0.0.2
Step 6:
Click on the "Write" button to save the settings.
Once the "write" is complete, you can remove the modem from your computer and use it in your
BC2 or Cradlepoint router (if you're using a Cradlepoint router, make sure you have the
beta
firmware
installed). Your UML290 will now work in 3G mode!
