Setting Wi-Fi networks
1. Tap
Settings
from the applications menu.
2. Tap
Wireless & networks
>
Wi-Fi settings
.
3. Tap
Wi-Fi
to activate the technology.
4. Tap
Automatic connection
if you want the P4100 to connect to the Wi-Fi network
automatically.
5. Tap
WPS connection
and tap
Button connection
or
PIN connection
if you want to
establish a new wireless connection using the Wi-Fi Protected Setup (WPS). You should
press WPS button or enter PIN on your Wi-Fi access point within two minutes.
Searching for Wi-Fi networks
1. Tap
Settings
from the applications menu.
2. Tap
Wireless & networks
>
Wi-Fi settings
.
3. Tap
Wi-Fi
to activate the technology. The P4100 scans networks automatically every six
seconds. The newly found networks appear on the bottom of the list.
Adding a Wi-Fi network
1. Tap
Settings
from the applications menu.
2. Tap
Wireless & networks
>
Wi-Fi settings
.
3. Tap
Wi-Fi
to activate the technology.
4. Tap
Add Wi-Fi network
.
5. Enter Network SSID and select the security type among
Open
,
WEP
,
WPA/WPA2 PSK
and
802.1x EAP
. Aside from
Open
, you must enter a password for the network.
6. Tap
Save
.
Disconnecting to a Wi-Fi network
1. Tap the network that is connected to the P4100.
2. Tap
Forget
to disconnect with the network.
Connecting to a 3G network
Use 3G (or EDGE if available) to connect the P4100 to the Internet. You will need a data plan to
