16
Bridge installation and configuration guide
January 2018
© 2018 Centrica plc. Registered office: Millstream, Maidenhead Road, Windsor, Berkshire. SL4 5GD.
Registered in England & Wales No 3033654
Loading the Bridge Configuration from a Configuration File
You can use the configuration file for configuring other bridges that have similar configuration requirements. For
example, if bridges in a chain of stores share the same Internet connection type and access points, you can prepare
one configuration file and use it for configuring other bridges in these locations.
You can also load the configuration file onto the same bridge if its configuration gets corrupted.
How to Proceed
1.
Access the bridge web interface.
2.
Access the
Connection Setup
page.
3.
Select
Load Configuration from File
.
4.
Select the relevant file and click
Apply
.
5.
If necessary, enter the password manually (for example, Wi-Fi password, SSL Password, RSA Private
Key).
Modifying the Bridge Administration Settings
You can modify the bridge’s default settings or reset all settings, including connections, to factory defaults.
7.1.1
Modifying the Default URL and/or Port of the Panoramic Power Server
IMPORTANT
Do not change the pre-configured address of the Panoramic Power server (col.panpwrws.com) and/or port number
(8051) without explicit instructions from Panoramic Power customer support. The bridge uses these settings to
transmit sensor data to the Panoramic Power cloud.
For SSL Bridge versions the address will be: (bridges.powerradar.energy). and the port number is 443 (standard
secure port). The bridge will not connect with different parameters.
To access these fields, select
Administration
in the bridge web interface.
