PANNOMED VET LIFT 7H9.6P1, Instruction Manual

Page: 8 / 27

Instruction Manual VET LIFT
Page 8 of 27
Version 2.02
For lowering the table top, press the left (shorter) pedal. When doing so, however, it is
necessary to push this pedal and hold it down until the table top has again reached the
desired height. Releasing the pedal brings the table top to a standstill at the desired height.
Adjustment of the tilting mechanism (version with tilting top)
By actuating the flap located on the underneath of the table top (see picture below on the
left), the tilting mechanism is activated. Assisted by a gas pressure spring, the top can be
held in any desired position (up to max. 11°), and releasing the flap keeps it in the respective
position. As a result, this mechanism allows convenient single-hand operation.
Tilting as well as tilting back (in the opposite direction) is performed by actuating and
holding the indicated flap upwards.
Maneuverability (movable version with double castors)
The product is equipped with four independent double castors of large diameter (100 mm)
to ensure optimal maneuverability of the table, especially in narrow and angular
environments.
Each double castor can be locked individually and separately. For this purpose, the lever
discernible between the two castors must be pressed down.
Lowering
(Hold)
Lifting
(Pumping)
Tilting
(Actuate)
Tilting back
(Actuate)