BioCred User Guide
Version 1.2 (Oct. 2023)
Copyright
©
Panini 2020
Page 4 of 55
1.
Introduction
BioCred is an assisted customer operated product.
The device will be installed customer facing but overseen by an operator that will control the device via a Business Application (es example in
banking environment the Operator will be the operator and the Business Application will be the Operator Application).
Most functions can be activated by both the customer and the operator, while few only by the operator for security reason.
When a functionality is started by the Business Application (in this guide Web Application), BioCred follows the process as “slave” device; while if
the functionality is started directly from BioCred, the Web Application will not be involved in the process.
In field Web Application will be replaced by the Business Application, operating with the control logic.
The following guide describes:
•
the instruction for a user simulating the Operator’s role – and therefore using the Web Application UI to drive the device
•
the instruction for a final user – and therefore using BioCred Display UI to drive the device
2.
Safety Precautions
Before you begin operating or servicing your Panini BioCred as instructed in the User Guide or Service Manual, please make sure you read and
understand these important safety instructions:
-
For cleaning operations, refer to the BioCred Cleaning and Maintenance Guide.
-
Do not attempt to service or repair the device, except as instructed elsewhere in the User guide.
-
Do not attempt to service or repair the external power supply of the device that may expose you to dangerous voltage points or other risks.
-
Refer all servicing to qualified service personnel.
-
BioCred will comply to the standard IEC/EN 62368-1 and UL 62368-1 only using the Power Supply model provided with the device or PoE (Power
over Ethernet) 48VDC IEEE 802.3af compliant.
- OPERATING CONDITIONS:
•
Temperature: +15°C ÷ +35°C (59°F to 95°F)
•
Humidity: 20% ÷ 80% R.H. non-condensing
