BA_PH_3V_EN_07-22.docx
45
15
Laser Cut Position Indicator (Option)
As an option, the bandsaw can be equipped with a laser cut position indicator (laser class 1M). This provides
optical support during cutting by projecting the cutting edge onto the workpiece. The workpiece can thus be
optimally aligned before cutting in order to keep waste as low as possible.
Figure 32: Laser device
Seen from the direction of the workplace, the laser de-
vice is installed behind the saw blade guard and tilted
in the direction of the machine.
Figure 33: Laser cutting edge
The laser beam projects the exact cutting edge onto
the workpiece and thus provides valuable support dur-
ing cutting.
15.1.1
Special Features of Use
•
The installed laser must not be replaced by a laser of a different type.
•
No additional optical devices may be used.
•
Laser repairs may only be carried out by the laser manufacturer or by authorised persons.
Caution: Looking directly into the laser beam will cause serious eye injury!
The operating instructions of the laser manufacturer must be observed.
The Art. No. for the laser directional light as well as other accessories can be found in chapter
