BA_PH_3V_EN_07-22.docx
15
4.7
Advantages and Special Features of the 3V
The most essential characteristic of this bandsaw machine is that it is also suitable for processing very large
workpieces. The large-dimensioned work table and the special design, in which the saw blade is guided over 3
wheels, make this possible.
This special design results in a maximum cutting width of 1450 mm and a cutting height of up to 1000 mm. The
precise APA 2 saw blade guide ensures an optimal cutting result.
The shapely machine stand is designed in a modern, torsion-free double-chamber welded steel construction and
meets all the requirements of modern woodworking.
4.8
Standard Equipment
•
Machine stand in torsion-free double-chamber welded steel construction
•
All three doors are protected by safety switches
•
Three-phase motors with 3 kW (4 HP)
•
Finely planed machine table
•
Replaceable table insert
•
Fence ruler can be used to the left and right of the saw blade, fence profile can be folded over
•
Dynamically balanced bandsaw wheels with vulcanised rubber bandages
•
Blade tension indicator with viewing window for setting the recommended tension
•
Upper and lower precision bandsaw guide APA 2 (size 2)
•
Electromotive height adjustment of the upper saw blade guard
•
Integrated saw blade guard
•
Scraper brush and chip catcher on the lower wheel
•
Push-switch control with automatic star-delta start-up
•
Two emergency stop buttons
•
Mechanical motor brake
•
Machine on adjustable feet for ground clearance during forklift transport
•
Push stick with bracket on machine housing
•
Standardly without saw blade (saw blades are available as accessories)
•
CE-compliant design
4.9
Available Accessories
•
Suitable saw blades, special accessories and optional components can be found in chapter
