BA_PH_335-20_EN_07-22.docx
31
10.4
Operating the Fence
10.4.1
Linear Adjustment
Figure 19: Clamping lever for fence
Figure 20: Linear adjustment of the fence
1.
To move the fence forwards and backwards, press
the two clamping levers (
1
) and (
2
) together.
2.
Push the fence to the desired position
and release both clamping levers again
The fence engages and is positioned.
10.4.2
Angular Adjustment up to 35°
To adjust an angle, the auxiliary fence must first be folded down (parallel to the table).
Figure 21: Activate angular adjustment
Figure 22: Adjusting angles
1.
For angular adjustment, press both levers (
1
) and
(
2
) to the left when released from each other and
hold this position
The stepless locking of the an-
gle adjustment opens.
2.
By pushing the lever back and forth while holding
it to the left, the angle can be adjusted to the de-
sired position by means of the angle scale (
6
).
3.
Resetting to 0° is done in the same way.
4.
If an angle of more than 35° is required, you must follow up with the lever (see
next page).
1
2
̶
+
6
