PVIQ™ CONNECTIVITY SYSTEM USER MANUAL V 1.0
29
set mode <x> location
Where <x> is the offset number of the panel.
This is a future feature in the PViQ™ Connectivity Web UI that has not been
implemented yet.
Exiting Location Mode
To exit Location Mode, and return to Secure Mode, use the CLI set mode command, as
shown below:
set mode <x> secure
Where <x> is the offset number of the panel.
Mode Identification Summary
The table below provides a quick reference for identifying the modes of the IU.
Table 3: Interface Unit Mode Summary
Interface Unit Modes
Secure Mode
or Location Mode
(In Location Mode, all port LEDs will also be Green)
Trace Mode
MAC Mode
MAC Mode – single ended connection
Learn Mode
