PVIQ™ CONNECTIVITY SYSTEM USER MANUAL V 1.0
153
Appendix G: Interacting with the PViQ™
Connectivity System Interface Units
PViQ™ Connectivity System Interface Unit (IU) Overview
The PViQ™ Connectivity System has several standard operating modes. These various
modes may be accessed through unique combinations of key presses using the
Function Keys (the Confirmation Key and Next Key), or through the Web UI.
This Appendix will describe how to interface with the Interface Unit (IU).
Interface Unit (IU) Function Keys
Once the PViQ™ Connectivity System components have been installed and powered
up and the system is in the Secure Mode state, one way to interact with the panel itself
is through the Interface Unit (IU) Function Keys, located on the front of the IU.
The following sections describe how the function keys work and some of the general
tasks that can be accomplished with these keys.
Identifying the Function Keys
The IU has two Function Keys, located on the front of each Interface Unit.
• The Left Function Key is called the “Confirmation” Key. It is identified by the
small checkmark to the left of the key.
• The Right Function Key is called the “Next” Key. It is identified by the arrow to
the right of the key.
Figure 115: IU Function Keys
Pressing the Function Keys in predefined sequences enables users to initiate different
operating modes.
