PVIQ™ CONNECTIVITY SYSTEM USER MANUAL V 1.0
133
Appendix C: PViQ™ Connectivity CLI
Commands
The following lists the available CLI commands and provides definitions and other
information for their use.
NOTE: From within the CLI, type “?” to receive a listing of all possible commands.
Narrow your search by entering a basic command (such as config or show) followed by
the “?.” For example:
PSH > show ?
config
The config command allows configuration of various components and variables, as
shown below:
config contactname <name>
Configures the contact name for this PViQ™ cluster. The variable <name> is a
256 byte free format string.
config devicename <name>
Configures the device name for this PViQ™ cluster. The variable <name> is a
256 byte free format string.
config offsetname <1-5> <name>
Configures the name for this PViQ™ Patch Panel. The variable <name> is a 256
byte free format string.
config ip
Displays the current IP configuration.
config ip commit | config | [-type] [-address] [-mask] [-gateway]
Sets or changes the current IP configurations using the entered parameters.
config ntp
Displays the Network Time Server configuration.
