© Panduit Corp. 2020
PLA-100, PLA-H100
Rev. 02
1 / 2021
Page
23
of
34
12: USER INTERFACE AND ERROR DESCRIPTIONS
The user interface for the Panduit Label Applicator system provides users with operational status. On
power-up the user interface illuminates the Power and
“Caution”
until the initialization of all hardware is
completed. At the end of the Power up sequence the user interface will transition to either “Ready” or
“Error”.
If the system is in error during initialization or normal operation, the Error status
indicator on the User Interface along with 1 of the
5 extended error location LED’s shown
in Figure 10 will be illuminated.
Note:
When any mechanisms are moving the
“Caution”
LED will be illuminated and flashed.
Problem:
No
power available to electronics while power is turned on.
Solution: Remove power cord. Remove fuse cover. Check fuse and replace per Electrical
Specifications in section 6A. Re-install fuse cover. Attach power cord. Toggle power switch to turn
the unit on. If this does not correct the issue, please contact Panduit Customer service.
Power
Reset Button
Ready
Error Location
Caution/Waiting
System Ready
ON
OFF
ON
OFF
OFF
System Error
ON
ON
OFF
ON
OFF
Error Location
Ready
Caution
Motors Moving
Error
Reset Button
Power Indicator
Figure 28: User Interface
Figure 29: Error Location Indicators
Applicator Head
Error
Peel & Present
Error
Take-Up
Error
Media
Detect Error
Media Error
