For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2014
FS067
Page 1 of 4
Opticom
Drawers and Trays
Part Numbers: FMD1, FMD2, FMT1, FMT2
1 - #10-32 x 5/16" screw
1 - Strain Relief Bracket
2 - Bend Radias Brackets
10 - Pan-Ty Cable Ties
4 - #10-32 Hex Nuts
1 - 24" Spiral Wrap
3 - #10 Flat Washers
4 - #12-24 x 1/2" screws
1 - Caution Label
2 - Spools
Fiber optic cable is sensitive to excessive pulling, bending and crushing forces. Consult the manufacturer’s cable specification sheet for
the specific cable in use.
Follow TIA/EIA 568-A, 569, 606, and 607 installation guidelines where applicable.
DANGER: UNMATED CONNECTORS MAY EMIT INVISIBLE LASER RADIATION. DO NOT LOOK DIRECTLY INTO THE END OF THE
CONNECTOR, DO NOT INSPECT WITH MAGNIFYING DEVICES. MAINTAIN CAP ON UNMATED CONNECTORS.
CAUTION:
1 - Port Identification Label
(For part numbers FMD1 and FMD2 ONLY)
(For part numbers FMD1 and FMD2 ONLY)
2 - Adhesive Mounts
FMD1
FMD2
FMT1
FMT2
Contents:
1 - Enclosure
(For part numbers FMD1 and FMD2 ONLY)
1 - Laser Warning Label
ASSEMBLY
(FMD2 shown)
Caution label
Laser warning label
Port identification label
Enclosure
Spool
Bend radius bracket
Grommet
Strain relief
bracket
#10-32 x 5/16" screw
